User's Manual

Advanced
Figure 2-4 shows Advance function of RaUI.
Figure 2-4 Advance function
Wireless mode : Select wireless mode. 802.11 B only, 802.11 A only, 802.11 B/G mix,
802.11 B/G/N mix, 802.11 A/B/G mix, and 802.11 A/B/G/N mix modes are supported.
(802.11 A/B/G mix selection item only exists for A/B/G adapter ; 802.11 B/G/N mix selection item
only exists for B/G/N adapter ; 802.11 A/B/G/N mix selection item only exists for
A/B/G/N adapter)
Wireless Protection : User can choose from Auto, On, and Off.
(only 802.11n adapter don't support.)
Auto : STA will dynamically change as AP announcement.
On : Always send frame with protection.
Off : Always send frame without protection.
TX Rate : Manually force the Transmit using selected rate. Default is auto.
(802.11n wireless card don't support TX Rate now)
Enable TX Burst : Ralink's proprietary frame burst mode.
Enable TCP Window Size : Enhance throughput.
Fast Roaming at : fast to roaming, setup by transmit power.
Select Your Country Region Code : eight countries to choose. Country channel list : Country
channel list. (11A ListBox only shows for A/B/G adapter.)
Show Authentication Status Dialog : When you connect AP with authentication, choose
whether show "Authentication Status Dialog" or not. Authentication Status Dialog display the process
about 802.1x authentication.
Enable CCX (Cisco Compatible eXtensions) : support Cisco Compatible Extensions function.
LEAP turn on CCKM.
Enable Radio Measurement : can channel measurement every 0~2000 milliseconds.
Apply the above changes.
- 46 -