User's Manual
- 3 -
Introduction
Thank you for purchasing Wireless LAN PCI Card. Wireless card is a perfect combination
product of performance and cost-effectiveness. It is sincerely hoped that you can enjoy the wireless
world through this solidly profiled wireless card.
It provides a full solution of the IEEE 802.11b/g protocols, this solution passed the
WiFi tests that are compatible with all the wireless products with WiFi logo. If you
have a wireless card on hand, it means you can connect to the wireless world without any difficulty.
It provides all the data rates in the IEEE 802.1b/g standards, which confines the highest data rate
as 54Mbps. In addition, it rewards customers with proprietary
“Turbo mode” for a better throughput as well as supports both the short and long preambles to ensure
the compatibilities with legacy wireless products and new ones, saving the panic works for finding
compatible products.
Since the security has became one of the most important issue in the wireless society,
it provides you with the full security coverage from the naïve 64/128bits Wep encryptions, second
generation WPA-PSK and WPA-AES encryption, to the most advanced WPA2-PSK and WPA2-
AES encryption. WPA2 is the latest security standard currently approved by WiFi standard.
Notice : The changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
IMPORTANT NOTE: To comply with the FCC RF exposure compliance requirements, no change to the antenna or the
device is permitted. Any change to the antenna or the device could result in the device exceeding the RF exposure
requirements and void user’s authority to operate the device. This device should be installed and operated with a minimum
distance of 20centimeters between the radiator and your body.
The Federal Communication Commission Radio Frequency Interference
Statement includes the following paragraph:
•The equipment has been tested and found to comply with the limits for a Class
B Digital Device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction, may cause
harmful interference to radio communication. However, there is no grantee that
interference will not occur in a particular installation. If this equipment dose cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on , the user is encouraged to try to correct the
interference by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.
The user should not modify or change this equipment without written approval
Form Loopcomm Technology,Inc..Modification could void authority to use this equipment.