Certifications

MASTER CONTRACT: 267857
REPORT: 70100510
PROJECT: 70100510
Page No: 8
Date Issued: December 12, 2016
DQD 507.10 Rev 2016-07-15
5.2 Test Gases
5.3 Test pressures and burner adjustments
5.4 Combustion
5.5 Bruner operating characteristics
5.6 Pilot operating characteristics – NA. No Pilot.
5.7 Automatic gas ignition systems – Electric spark device with auto shut down device.
5.8 Direct ignition systems – NA, no direct ignition systems.
5.9 Manual ignition systems –NA, auto gas ignition systems.
5.10 Manual operated gas valve – NA, use certified type.
5.11 Gas appliance pressure regulators – NA, no gas appliance pressure regulators
5.12 Automatic valves – NA, no automatic valve.
5.13 Dual cylinder manifold – NA.
5.14 Manifold and gas control assembly capacity - NA
5.15 Wall, floor and ceiling temperatures
5.16 Rain test
5.17 Wind test
5.18 Bruner durability
5.19 Glass panels
5.20 Appliance structure
5.21 Orifice and orifice fitting temperatures
5.22 Marking material adhesion and legibility – NA, attached aluminous tag.
5.27 ANSI Z21.892013/CSA1.18-2013 tag pulling test
Section 6 M&P Plan
See main archive file for details of testing.
INDEX
Figure NO. DESCRIPTION
Project No. 70100510
Drawings for Model S4-001
1. EXPLODED DRAWING
2. WHOLE VIEW
3. BURNER RING
4. GUARD
5. NOZZLE
6. CORRUGATED PIPE
7. GROUND WIRE
8. SWITCHING VALVE
9. IGNITION PIN
10. THERMOCOUPLE
11. CONTROL KNOB
12. BURNER PLATE
13. IGNITOR
14. BURNER COVER