Certifications

ManualsBrandsLoon Peak ManualsAll Outdoor Fireplaces & Fire PitsFelan 18" H x 48" W Concrete Propane Outdoor Fire Pit Table

Descriptive Report

and Test Results

This report shall not be reproduced, except in full, without the approval of CSA Group.

No. 10, Ke Yan Road, Guangzhou Science Park, Luo Gang District, Guangzhou, 510663, China

Telephone: (86)20.87320648 Fax: (86)20.87320306 www.csagroup.org

DQD 507.10 Rev 2016-07-15

MASTER CONTRACT: 268449

REPORT: 70100510

PROJECT: 71000510

Edition 1: December 12 2016; Project 70100510 - Guangzhou

Issued by Laura Y Li

Contents: Certificate of Compliance - Page 1 to 1

Supplement to Certificate of Compliance - Page 1

Description and Tests - Pages 1 to 12

Att1 Figures - 1 to 153

Att2 – M&P Plan

PRODUCTS

CLASS 2701-03 – DECORATIVE GAS APPLIANCES- Outdoor Fireplaces

CLASS 2701-83 – DECORATIVE GAS APPLIANCES - Outdoor Fireplaces-Certified to US Standards

MODEL NUMBER

For use of LP-Propane Gas

INPUT (BTUH)

S4-001

1 SS Round-Shaped Burner, 40,000Btu/hr

S5-001

1 SS Round-Shaped Burner, 50,000Btu/hr

S5-003

1 SS I-Shaped Burner, 40,000Btu/hr

S5-005

1 SS I-Shaped Burner, 50,000Btu/hr

S5-006

1 SS Round-Shaped Burner, 50,000Btu/hr

S5-007

1 SS Round-Shaped Burner, 50,000Btu/hr

APPLICABLE REQUIREMENTS

ANSI Z21.97-2014/CSA 2.41-2014 Outdoor Decorative Gas Fireplaces

Summary of content (12 pages)

PAGE 1
Descriptive Report and Test Results MASTER CONTRACT: 268449 REPORT: 70100510 PROJECT: 71000510 Edition 1: December 12 2016; Project 70100510 - Guangzhou Issued by Laura Y Li Contents: Certificate of Compliance - Page 1 to 1 Supplement to Certificate of Compliance - Page 1 Description and Tests - Pages 1 to 12 Att1 Figures - 1 to 153 Att2 – M&P Plan PRODUCTS CLASS 2701-03 – DECORATIVE GAS APPLIANCES- Outdoor Fireplaces CLASS 2701-83 – DECORATIVE GAS APPLIANCES - Outdoor Fireplaces-Certified to US Standar
PAGE 2
MASTER CONTRACT: 267857 REPORT: 70100510 PROJECT: 70100510 Page No: 2 Date Issued: December 12, 2016 MARKINGS The manufacturer is required to apply the following markings:  Products shall be marked with the markings specified by the particular product standard.  Products certified for Canada shall have all Caution and Warning markings in both English and French. Additional bilingual markings not covered by the product standard(s) may be required by the Authorities Having Jurisdiction.
PAGE 3
MASTER CONTRACT: 267857 REPORT: 70100510 PROJECT: 70100510 Page No: 3 Date Issued: December 12, 2016 FACTORY TESTS The submitter shall ensure that the factory tests are conducted at the frequency specified and the results are documented and made available for review by CSA field services representatives. Test Test Fire Burner, Manifold & Control Assy. – Proper Operation Pass/Fail Criteria: Valve shall turn freely The ignition device shall light the burner.
PAGE 4
MASTER CONTRACT: 267857 REPORT: 70100510 PROJECT: 70100510 Page No: 4 Date Issued: December 12, 2016 单击此处输入文字。 DESCRIPTION Notes: 1.
PAGE 5
MASTER CONTRACT: 267857 REPORT: 70100510 PROJECT: 70100510 Page No: 5 Date Issued: December 12, 2016 Manifold Pressure 11.0 in. W.C. Minimum Inlet Pressure 11.0 in. W.C. Self-contained LP System uses a 20 lb LP cylinder constructed and marked in accordance with specifications of U.S. Department of Transportation (DOT). A regulator is employed at the outlet of the LP cylinder. ORIFICE SIZES Model S4-001 S5-001, S5-005, S5-006, S5-007 S5-003 Propane 1.88 mm 2.27 mm 2.
PAGE 6
MASTER CONTRACT: 267857 REPORT: 70100510 PROJECT: 70100510 Hose Page No: 6 Date Issued: December 12, 2016 Heater ZSHO-2 X Guangfeng LL516 X * integrated with QCC(model number QCC102) RYQF01(CSA 2431817) X Regulator Zhongshan KSUN Hardware Production Co., Ltd KSUN RY0953 X Hose Heater Hose ZSHO-2 X Guang Feng LL516 X QCC KSUN QCC1 X Hose Assy RYQB01(CSA 2431817) X Regulator Zhongshan KSUN Hardware Production Co.
PAGE 7
MASTER CONTRACT: 267857 REPORT: 70100510 PROJECT: 70100510 Page No: 7 Date Issued: December 12, 2016 For S5-001, S4-001, S5-005, S5-006, S5-007 Ignitor Yongshen YD1.5-2(CSA 1610337) Anhui Hefei Xinda Electronic Co., Ltd Taishan Ruichang DHLG-3,4(CSA 1433786) Yongshen YD1.
PAGE 8
MASTER CONTRACT: 267857 REPORT: 70100510 PROJECT: 70100510 Page No: 8 Date Issued: December 12, 2016 5.2 Test Gases 5.3 Test pressures and burner adjustments 5.4 Combustion 5.5 Bruner operating characteristics 5.6 Pilot operating characteristics – NA. No Pilot. 5.7 Automatic gas ignition systems – Electric spark device with auto shut down device. 5.8 Direct ignition systems – NA, no direct ignition systems. 5.9 Manual ignition systems –NA, auto gas ignition systems. 5.
PAGE 9
MASTER CONTRACT: 267857 REPORT: 70100510 PROJECT: 70100510 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. Page No: 9 Date Issued: December 12, 2016 REGULATOR VALVE WITH GAS HOSE FIREPIT BASE DOOR FOOT CSA WARNING LABEL PLATE HEAT SHIELD (HEAT INSULATION COTTON ) HEAT SHIELD (GALVANIZED SHEET) THE BURNER COVER HANDLE HIGH VOLTAGE INSULATION TUBE THE CYLINDER BASE Drawings for Model S5-001 25. 26. 27. 28. 29. 30. 31. 32. 33. 34. 35. 36. 37. 38. 39. 40. 41. 42. 43. 44. 45. 46. 47.
PAGE 10
MASTER CONTRACT: 267857 REPORT: 70100510 PROJECT: 70100510 61. 62. 63. 64. 65. 66. 67. 68. 69. 70. Page No: 10 Date Issued: December 12, 2016 IGNITION PIN NOZZLE HEAT SHIELD A HEAT SHIELD B CORRUGATED PIPE REGULATOR VALVE WITH GAS HOSE CONNECTION CABLE CYLINDER FIXED RING Tag 1 Tag 2 Drawings for Model S5-005 71. 72. 73. 74. 75. 76. 77. 78. 79. 80. 81. 82. 83. 84. 85. 86. 87. 88. 89. 90. 91. 92. 93. 94. 95. 96.
PAGE 11
MASTER CONTRACT: 267857 REPORT: 70100510 PROJECT: 70100510 107. 108. 109. 110. 111. 112. 113. 114. 115. 116. 117. 118. 119. Page No: 11 Date Issued: December 12, 2016 CONTROL KNOB BURNER PLATE IGNITOR BURNER COVER REGULATOR VALVE WITH GAS HOSE FIREPIT BASE DOOR FOOT CSA WARNING LABEL PLATE HEAT SHIELD (MGO) HEAT SHIELD (ALUMINUM) THE BURNER COVER HANDLE THE CYLINDER BASE Drawings for Model S5-007 120. 121. 122. 123. 124. 125. 126. 127. 128. 129. 130. 131. 132. 133. 134. 135. 136. 137. 138. 139. 140. 141.
PAGE 12
MASTER CONTRACT: 267857 REPORT: 70100510 PROJECT: 70100510 153. Page No: 12 Date Issued: December 12, 2016 Guarantee Letter for Translation This report shall not be reproduced, except in full, without the approval of CSA GROUP. Manufacturer’s tolerances have not been verified. ---End of Report--- DQD 507.