Installation & Assembly
Step 3
Attach the braces to the bench. Align the predrilled hole in one end of the brace with the predrilled pilot hole
in the center of the leg & the other hole in the brace with the predrilled pilot hole in the bench top. Fasten
with the 2” lag screws. (See photos 4 & 5.) Before fully tightening the lag screws with the 7/16” wrench or
socket, set the bench upright. This will prevent it from being uneven when tightened. If you have a 2’ bench
the braces need to be attached beside each other (see photo 6).
photo 5 photo 6