Installation & Assembly

ManualsBrandsLoon Peak ManualsFurnitureStella Panel Headboard

Table Of Contents

IMPORNT NOTE















Part List

Summary of content (5 pages)

PAGE 1
IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the parts. We have taken great care in the design of this product and request that you carefully and strictly follow our assembly instructions to ensure a completed product as it was designed.
PAGE 2
IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the parts. We have taken great care in the design of this product and request that you carefully and strictly follow our assembly instructions to ensure a completed product as it was designed. Part List G. C. Post 1 pc. Crown 1 pc. D. Post 1 pc. E. Post 1 pc. • ... .. Hardware List " Cam Lock Screw 7 pcs. (+1 extra) � Cam Lock 7 pcs.
PAGE 3
Assembly Instructions 2/3 IMPORTANT * Do not tighten up all the bolts until each part is properly assembled. * You should keep Key Wrench in a safe place as you may need to tighten up the bolts in the future. STEP 1 Insert Cam Lock Screws into the pre-drilled holes of Crown (B). f( Cam Lock Screw I I I I STEP2 Attach Bolt to Posts (C) and (D). ('-, .) �� SquareWasher ', 'Q � STEP3 (Figure 1) Attach Post (C) to Post (E) and Post (D) to Post (F) using Square Washers and Nuts.
PAGE 4
Assembly Instructions 3/3 < STEP4 KeyWrench T , ! ! T < Head Cap Bolt (Figure 2) STEP 5 Attach Crown (B) to unit using Cam Locks. (See figure 3) 0 (Figure 3) Attach Headboard (A) and Stretcher (G) to post units with Head Cap Bolts. Tighten all Head Cap Bolts using Key Wrench.
PAGE 5
VERY IMPORTANT !! CARE INSTRUCTIONS NEVER NEVER USE GLASS CLEANERS ON FINISHED FURNITURE. AMMONIA WILL CHEMICALLY ATTACK THE LACQUER. ALLOW LIQUIDS OF ANY KIND TO REMAIN ON THE FURNITURE. ABSORPTION CAUSES WOOD TO WARP AND SPLIT AND FINISHES TO DELAMINATE. DO NOT PLACE IN DIRECT SUNLIGHT. DO NOT WRITE DIRECTLY ON SURFACE. PREVENT FADING PREVENT MARKING DO NOT USE COMMERCIAL WAXES AND POLISHES. PREVENT YELLOWING DO NOT PLACE HOT OBJECTS ON SURFACE.