Assembly Instructions

Fixture
ASSEMBLY AND INSTALLATION
INSTRUCTIONS
WARNING:
TO AVOID RISK OF ELECTRIC SHOCK, BE SURE TO SHUT OFF
POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.
NOTE: Before installing, consult local electrical codes for wiring and grounding requirements.
Installation Steps:
Mounting Screw
Cross Bar
Green Grounding Screw
Wire Nut
Hex Nut
Wall Box
Grounding Wire
Set Screw
Fixture Wire
House Grounding Wire
Wall Bracket
1. Attach the cross bar to the wall box by using 2 mounting screws.
2. Adjust the cross bar to horizontality, and secure the hex nut.
3. Make wire connections with wire nuts:
---Connect the black wire from fixture to the black wire from power source.
---Connect the white wire from fixture to the white wire from power source.
---Attach the grounding wire and the house grounding wire to the cross
bar with a green grounding screw.
Carefully tuck wires back into the wall box.
4. Attach the fixture to the cross bar, align the holes of the wall bracket with
the holes of cross bar, and secure the fixture firmly with the set screws.
5.Install a bulb. (Please do not exceed the maximum capacity, which is
recommended on the package.)
6.Turn on the power at fuse or circuit box.