IMPORTANT NOTICE: Storing and opening the leaf requires 2 people. ASSEMBLY INSTRUCTIONS Thank you for purchasing this quality product. Be sure to check all packaging materials carefully for small parts that may have come loose inside the carton during shipment. Reminders 1. Use only the hardware supplied. 2. Do not over-tighten bolts. 8. This item may require periodic tightening. COMPONENTS LIST QTy A | Table Top @ 1 Table Leaf % 1pe C | Telegram % PCs Mounting Plate ° 1pc Bosom Rail \\ PCs F | Clamp Lock 5
ASSEMBLY INSTRUCTIONS STEP 1: Attach Table Leg {C) to the Stretcher (H), using small flat washers (6), spring washers (2}, short bolt {5) tighten with Allen key (7). Attach Table Leg {C) and Stretcher (H) to the flat washers (1), spring washers (2), hex nut (3) tighten with wrench (4). STEP 2: STEP 3: Please take off the leaf and lock the table before assembly. Place table top (A} upside down on a smooth and flat surface.
ASSEMBLY INSTRUCTIONS STEP 4: Attach Mounting Plate (D) to the Bottom Rail (E), using fiat washers (1), spring washers (2}, short bolt (5) tighten with Allen key (7). STEP 5: Tum the table to upright position.open the latches underneath of table top (A). pull from both ends of table top (A). Tum the table to the upright position. Unlock the latch underneath of the Table Top (A). Pull the table top from both ends, place the Table Leaf (B) in position.
