Owner Manual

Align the end table
legs (#3,4) to the app-
ropriate holes, then
insert a bolt (#A) into
each hole. Secure using
the Allen wrench (#D).
1. Place the end
table top (#6) face
down onto a
protected surface.
2. Prepare 16 bolt
assemblies by first
inserting a lock
washer (#C) onto
the bolt (#A) then
a flat washer (#B)
onto that same
bolt (#A).
3. Align the end table legs (#3,4) to
the holes along each corner of the
end table top (#6). Insert 2 bolts
into each corner and secure.