Sensor SONY IMX307 Aperture F18 Lens Angle Front: 140° / Rear: 140° Photo JPG Max. 12M Video MP4 H.264 Resolution FHD 1920 X 1080P fps Dual-Channel HD 1280X720P fps Dual-Channel Battery 1600 mAh PS: 150 minutes working time at full charge. Size / Weight |110X40X33 mm/ 104g Memory card Cardiff Max.
Long press 3 seconds to turn on/off the power. Short press once can start/stop recording. Quick short press twice to turn on/off the WIFI. Short press 5 times to format the SD card (have to stop recording and turn off the wife first) PS © if the machine detects there is no 80 card inside, the 3 lights flash and it's a warning of no SD card. Charge the Battery Please charge the dash cam before use. . Please use a Micro USB cable to charge the dash cam. .
2. Long press the key button 3 seconds to tum on the dash cam, and it will vibrate once. 3. When the dash cam is turned on, the recording light (white light) remains on, and it will automatically enter the recording mode. The white light will flash during recording.
Use the Controller 1. The controller is optional. The wireless design can be flexibly installed and used according to the operator's need. 2. The dash cam and the controller will be automatically connected within 3 meters. . Attribution ; procession to'take a photo The green Twilight shine The red light will shine: whiles docking the file while:taking the photo Lock button * press once to lock the current recording file Narcissism VE gon Hoh VF aon 1. Download the VF CAM APP. 2.
3. Tum on the phone $% to find the device WIFI and enter the password to connect it. The WIFI default WIFI name is default password is 12345678. Please don't change the WIFI name nor the password to avoid any connection error. 4. When the device is connected to the phone successfully, you may open the APP to view it. By using the APP you can start/stop recording, take photos and playback. 5. The setting icon on the top right corner, can make the general settings (need to stop recording first).
FCC STATEMENT This equipment has been tasted and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radii frequency energy and, if not installed and used In accordance with the instructions, may cause harmful interference to radio communications.
