User Manual

Box Contents
1 X MD752 Dehumidifier
1 X Water Tank
1 X Power Adaptor
1 X User Manual
1 X Drain Pipe
UNIT OPERATION
A. Device Operation:
1. After removing the packaging materials, there should be 3 items: A. LONOVE
dehumidifier, B. AC/DC power adaptor, C.Drain Pipe
2. Use the AC power supply. Install the water tank into the dehumidifier; plug the DC
power jack of AC/DC power adaptor to the DC Power Socket of the appliance, and then
plug the adaptor into the socket outlet.
3. This dehumidifier has two working modes(Day-mode and Night-mode).
(1)Press the “ON/OFF” Button to Day-mode, the blue indicator light and the decorative
light are on and the dehumidification effect is the most powerful, the noise level is between
35-45 dB.
(2)Long press the “ON/OFF” button 3 seconds to Night-mode, the low speed blue light is
on and the decorative light is off, the noise level is<35 dB, and the dehumidification effect
will be relatively weak.
4. This dehumidifier will stop the dehumidification automatically when the water reaches
the level, the red indicator light is on and the decorative light is flashing when the
water tank is full.
5. When the water tank is full, please cut off the power before pouring and then take out the
water tank from the machine. After pouring out the water, put the water tank back to the
correct position in the machine.
6. To switch off the unit, press “ON/OFF” Button. Please unplug the power cord if you do
not use the dehumidifier.
B. Description of Indicator lights:
 Blue Light(1): when the light shows in blue, means the unit is working(day mode).
 Low Speed Blue light (3) : when the light shows in low speed blue light, means the
unit is converted into low speed mute operation(night mode)
 Red Light is on and decorative Light is Flashing: means the water tank is full, reach
the water level or the water tank is in a wrong position.
C. How to Install the Drain Pipe:
1. Pull out the water tank;
2. Remove the soft rubber plug on the Drain hole;
3. Connect Drain hole and Drain Pipe.