DEHUMIDIFIER USER MANUAL MODEL:MD752 WELCOME PLEASE READ THIS INSTRUCTIONS CAREFULLY AND KEEP FOR FUTURE REFERENCE.
SPECIFICATIONS Capacity Approx 750ml per day at 30℃ (86℉), 80% RH Cooling element Thermo-electric Peltier module Fan 90mm x 90mm DC Brushless motor Power adapter 15V DC 4Amp Power consumption 60W Water tank capacity 1800ml/61 oz Water level detector Automatic stop when water is full, the red indicator light is on and the decorative blue light is flashing Drying feature Warm air outlet for drying purposes Product dimension 20cm(L)x20cm(W)x32.5cm(H);7.87in*7.87in*12.
PRODUCT DETAILS 1. On/Off button 2. Blue indicator light 3. Blue indicator light (low speed) 4. Decorative lights (below the key) 5&6. Air inlet 7&8. Air outlet 9. DC Power socket 10. Water tank 11.Drain hole 12. Water saturation induction 13.Water inlet 15. AC/DC switching mode power supply 14. DC power jack 16.
Box Contents 1 X MD752 Dehumidifier 1 X Water Tank 1 X Power Adaptor 1 X User Manual 1 X Drain Pipe UNIT OPERATION A. Device Operation: After removing the packaging materials, there should be 3 items: A. LONOVE dehumidifier, B. AC/DC power adaptor, C.Drain Pipe 2. Use the AC power supply. Install the water tank into the dehumidifier; plug the DC power jack of AC/DC power adaptor to the DC Power Socket of the appliance, and then plug the adaptor into the socket outlet. 3.
SAFETY INSTRUCTIONS ► Keep the unit in an upright position whenever in use. ► To avoid electric shock, avoid opening the unit. ► Always turn the device off when not in use. ► Avoid using a power adapter In excessively wet area. ► Ensure that inlet and outlet grilles are unobstructed. ► Use both hands when handling the unit to avoid tilting. ► Keep devices away from the reach of children. QUESTIONS AND ANSWERS 1.
TROUBLE SHOOTING Problem Possible Cause The “Red LED” is on when power connected The water tank is full or in wrong position Empty the water tank and replace it in correct position The float gets jammed Press the float and replace the water tank The dehumidifier doesn’t work The power supply is cut off DC power socket loose The air outlet is blocked Solution Check if the adaptor is plugged in Check the DC power socket and the power cord, ensure it is connected well Maintain the minimum clearance a
