DEHUMIDIFIER USER MANUAL MODEL:MD751 WELCOME ! PLEASE READ THIS INSTRUCTIONS CAREFULLY AND KEEP FOR FUTURE REFERENCE.
SPECIFICATIONS Capacity Approx 750ml per day at 30℃ (86℉), 80% RH Cooling element Thermo-electric Peltier module Fan 90mm x 90mm DC Brushless motor Power adapter 15V DC 4Amp Power consumption 60W Water tank capacity 2000ml/68 oz Water level detector When the water tank is full, the yellow indicator light is on and the green indicator light is flashing Drying feature Warm air outlet for drying purposes Product dimension 20cm(L)x20cm(W)x32.5cm(H);7.87in*7.87in*12.
How DOES IT WORK? The MD751 Dehumidifier works by way of thermoelectric cooling, which uses what's known as the Peltier effect to create a heat flux between the junction of two different types of materials. Using no compressors or moving parts. The device quietly pulls moisture from the air around it. Removing muskiness and dampness from the room. PRODUCT DETAILS 1.On/Off button 2.Humidity key (Increase) 3.Humidity key (Decrease) 4.LED humidity display 5.Power indicator(green light) 6.
UNIT OPERATION A. Device Operation: After removing the packaging materials, there should be 3 items: A. LONOVE dehumidifier, B. AC/DC power adaptor, C.Drain Pipe 2. Use the AC power supply. Install the water tank into the dehumidifier; plug the DC power jack of AC/DC power adaptor to the DC Power Socket of the appliance, and then plug the adaptor into the socket outlet. 3. This dehumidifier has two working modes(Day-mode and Night-mode).
QUESTIONS AND ANSWERS 1. Will this dehumidifier stop working when temperature under 59℉（15℃）? When the ambient temperature is lower than 59℉（15℃）, the temperature inside the dehumidifier is less than 41°F(5℃). At this time, the inside of the dehumidifier may freeze or frost, resulting in a poor dehumidification effect, even zero. 2.
TROUBLE SHOOTING Problem Possible Cause Solution The “Green LED” is flashing first when power connected The water tank is full or in wrong position Empty the water tank and replace it in correct position The dehumidifier doesn’t work The float gets jammed Press the float and replace the water tank The power supply is cut off Check if the adaptor is plugged in DC power socket loose Check the DC power socket and the power cord, ensure it is connected well The air outlet is blocked Maintain the m
