User Manual

UNIT OPERATION
A. Device Operation:
1. After removing the packaging materials, there should be 2 items: A. LONOVE
dehumidifier, B. AC/DC power adaptor.
2. Use AC power supply. Install the water tank in to the dehumidifier; plug the DC
power jack of AC/DC power adaptor to the DC Power Socket of the appliance,
and then plug the adaptor in to the socket outlet.
3. Press the “ON/OFF” Button. The indicator LED will turn on (BLUE) and the
fan will continuously run.That means the dehumidifier will start working.
4. If the Blue LED Flashing after the power connected, please check whether the
water tank in correct position.
5. This dehumidifier will stop the dehumidification automatically when the
water reaches the level and the Blue Light LED will Flashing when the
water tank is full. Please cut off the power supply before you take out the
tank.
6. When the water tank is full, remove the black drain cover of the water tank and
discard the collected water. Then replace it.
7. To switch off the unit, press “ON/OFF” Button. Please unplug the power cord if
you do not use the dehumidifier.
B. Description of Indicator lights:

Blue Light: when the light shows in blue, means the unit is working.

Blue Light Flashing: means the water tank is full, reach the water level or the
water tank is in a wrong position
C. How to remove water tank and pour out the water:
When the water tank is full, the Blue LED Light will Flashing and the
dehumidifier will stop working automatically.
1. First, switch off the dehumidifier,press “ON/OFF” button, and unplug the
adapter.
2. Second, remove the water tank, then remove the black drain cover of the water
tank and discard the collected water. Then replace it.
3. To continue dehumidifying, plug the adapter and push the “ON/OFF” button
again.
4. Please disassemble the water tank first when you want to clean the water tank.
-4-
QUESTIONS AND ANSWERS
1. Will this dehumidifier stop working when temperature under 59℉（15℃）?
When the ambient temperature is lower than 59℉（15℃）, the temperature inside the
dehumidifier is less than 41°F(5℃). At this time, the inside of the dehumidifier may
freeze or frost, resulting in a poor dehumidification effect, even zero.
2. Does the power cord/adapter get hot when using?
According to the working principle, the dehumidifier need power to operate and the it
needs time to dehumidify, the adapter will get warm but can be touched when using.
But for your safe, we do not recommend children to touch it.
3. Why is the dehumidification speed so slow? Only collect little water past 8
hours?
This dehumidifier is a electric semiconductor dehumidifier, it features quiet operation
and stable dehumidification effect. Best for household space smaller than 220sq.ft.
While other dehumidifier with compressor is noisy and only for industrial use.
Meanwhile, the dehumidification effect is related to the temperature, the humidity and
the size of the room. The more humid, the better effect.The smaller the room,the
better effect.
4. Will it make a very loud noise when using in bedroom?
The noise level is ＜35dB, it is very friendly for sleeping, you will not hear a loud
noise when it working at night.Good for enclosed room smaller than 220sq ft.
5. Does it work with 220 voltage?
Yes. The voltage of this dehumidifier is 110V -240V, it can work with 220 voltage.
But the plug type is subject to the country.
-5-