Installation Guide

See Better with Smart Lights
Clock/Temperature
(This operation is specific to the clock version)
● Turn off the light to set the clock.
● Long touch button 1 or 2 for seconds, the Hour will
flash, then short‐touch button 1 and 2 to set Hour.
● Wait for seconds after setting up the Hour, then it
will automatically switch to the Minute flash.
● Short‐touch button 1and 2 to set up the Minute.
● Wait seconds after you finish the time setting, the
time will be saved automatically.
● The clock shows for 5s, and shift to the temperature
showing for 2s, then go back to show the clock.
● It automatically displays the indoor temperature by auto sensing through the temperature sensor.
● DO NOT cover the temperature sensor.
● Night light will be auto‐on/off according to the brightness surrounding when the rocker switch is
keeping turned on.
● If need turn off the nightlight at night, please turn off the rocker switch manually.
AFTERCARE INSTRUCTIONS
Clean using a soft dry cloth only when turned off. Never use cleaning agents or abrasive materials. Do not
allow moisture to come into contact with lamp.
THANK YOU FOR YOUR SUPPORT.