Installation Guide

LED Lighted Medicine Cabinet
Manual to setting clock with touch switch
Choose and set the clock and temperature mode
-Turn off the light.
-Long-touch button 2 to choose and set the mode when it flash.
There are two clock and temperature modes to choose.
A: 12C/12F: Fahrenheit (F) and 12 hours
B: 24C/24F: Celsius (C) and 24 hours
The default mode is 12C/12F.
Setting the clock
-Turn off the light to set the clock.
-Long touch button 1 for seconds,the Hour will flash, then short-touch
button1 and 2 to set Hour.
-Wait for seconds after setting up the Hour,then it will automatically switch
to the Minute flash.
-Short-touch button 1and 2 to set up the Minute.
-Wait seconds after you finish the time setting,the time will be saved
automatically.
Turn on/off the touch switches’ blue background ligth
-In default mode the touch switches is with blue background light ,
long-touch button 3 to turn on/off the blue background light.
Remarks:
*The clock shows for 5s, and shift to the temperature showing for 2s, then
go back to show the clock.
*It automatically displays the indoor temperature by auto sensing through
the temperature sensor.
*DO NOT cover the temperature sensor.
Button 1 Button 2
Button 3