Owner Manual

Step 4
Step 5
Page 6 OF 9
C
A
G
7
1
6
2
7
4
G
B
A
C
Turn the Frame in Step 3 back right side up and place it in the position as
shown in the picture above.
Attach the Folding Support Bar(G) to the Seat Panel(A) using Bolts ( ),
①
Plastic Washers ( ), Sleeve Nuts ( ) and the Allen Key ( ).
⑥ ② ⑦
Do not fully tighten Bolts.
Note: A Plastic Washer should be placed between the Seat Panel and the
Folding Support Bar.
Position the Backrest (B) with mortise into the housing of the Folding Support
Bar (G) as shown in the picture above.
Secure the Folding Support Bar(G) to the Backrest (B) using Screws ( ) and
④
the Allen key ( ) as shown above.
⑦
Do not fully tighten Screws