Owner Manual

Step 3
Page 5 OF 9
A
F
8
5
A
C
7
2
6
7
Step 2
Place the Seat Panel(A) onto a clean, non-marring surface.
Position the KD Slat(F) onto the Seat Panel(A) using Screws( ) and a Screwdriver
⑤
( ) as shown above
⑧
Do not fully tighten the Screws
Turn the assemble in step 2 upside down as shown above.
Attach the Pre-fixed Front Leg( C) to the Seat Panel(A) using Bolts( ) Plastic
①
Washers ( ), Sleeve Nuts and the Allen Key ( ) as shown above
⑥ ② ⑦
Do not fully tighten Bolts.
Note:Plastic Washers should be placed between the Seat Panel and Front
Leg.