Owner Manual

8
Swing Assembly Diagram for Aunt Janie Model
Instructions on how to hang the swing (all models)
STEP #1- Install lag eye bolts into ceiling joists securely. A 5/16” hole should be predrilled into ceiling joist for
lag eye to be installed into. Once the hole is predrilled, use a screw driver, or a wrench to torque the lag eye into
predrilled hole. The lag eye should be driven in until the exterior of the round part or “eye” is flush or touching
the beam or ceiling surface. This step is crucial for installation safety. We recommend hiring a licensed
contractor to install the lag eyes to ensure they are firmly secured to the structural ceiling joists or beams
in the ceiling. Do not just install the lag eye bolts into the ceiling- they need to be installed into a
structural ceiling joist or beam for safety. is not liable for your installation, and if swing or your house is
damaged due to improper installation, we are not responsible for the repairs to the swing or your house.
Please make sure you follow the directions carefully or hire a licensed contractor!