Assembly Instructions

Step 2
Step 3
Place the Seat Panel(A) as shown in the picture.
Attach Pre-fixed Front Leg(C) to Seat Panel(A) using Bolts(①), Plastic
Place the Seat Panel(A) onto a clean, non-marring surface.
Position KD Slat(F) onto the Seat Panel(A) and attach using 4 Screws(⑤) and
6
C
A
5
8
A
F
Page 5 OF 9
Screwdriver(⑧).
Washers(⑥), and Sleeve Nuts(②) with Allen Keys( ⑦).
Do not fully tighten Bolts.
Note: The Plastic Washer should be placed between the Seat Panel and
Pre-fixed Front Leg.