Shade Install Instructions

1. INSIDE MOUNT SHADE

2. OUTSIDE MOUNT SHADE

3.INSTALL SAFETY CHAIN TENSIONER

SHADE INSTALL INSTRUCTIONS

You’ll nd mounting holes are pre-drilled through the headrail board. Start the screws into the mounting holes

and tighten until the tips of the screws are slightly showing on the top of the headrail. Hold the shade inside

the top of the window frame and drill the screws into the window frame through the mounting holes of the

headrail board.

* To install the shade ush with the window frame, a minimum window depth of 2 1/4" is required.

The brackets need to be placed where they will not interfere with the shade’s operating mechanism.

Attach the brackets to the wall or window frame at the desired height and make sure the draw cords move

freely around the mounting brackets. Attach the shade to the top of the brackets using the screws provided.

Safety tensioner is designed to minimize the hazards of the strangulation and

entanglement of small children by restricting access to the chain control.

The safety tensioner should be installed to the wall or window frame with

a screw so that the bead chain moves smoothly through the opening

of the tensioner.

Inside Mount

Outside Mount

PAGE 1
SHADE INSTALL INSTRUCTIONS 1. INSIDE MOUNT SHADE You’ll find mounting holes are pre-drilled through the headrail board. Start the screws into the mounting holes and tighten until the tips of the screws are slightly showing on the top of the headrail. Hold the shade inside the top of the window frame and drill the screws into the window frame through the mounting holes of the headrail board. * To install the shade flush with the window frame, a minimum window depth of 2 1/4" is required. Inside Mount 2.