Installation Instructions

Installation Instructions for

1.0

Outdoor

Screw the lamp into the socket. Refer to the label on the socket for Max Wattage Information.

Insert the diffuser into the fixture and secure it in place by installing the cover using the cover screws.

Follow enclosed supplement installation instructions for electrical and fixture installation onto house outlet box.

CAUTION RISK OF FIRE-

This product must be installed in accordance with the

applicable installation code by a person familiar with the

construction and operation of the product and the hazards

involved.

Use minimum 90°c supply conductors.

GP I :ENERAL RODUCT NFORMATION

These fixtures are intended to be installed utilizing NEC compliant junction

boxes.

This product is safety listed for damp locations.

Incandescent lamps may be dimmed with a standard incandescent dimmer.

LED LEDlamps may be dimmed with a dimmer. Consult lamp manufacturer for

additional information.

FIXTURE

DIFFUSER

LAMP

COVER

COVER SCREW

Outdoor Pendant

PAGE 1
Installation Instructions for Outdoor Pendant 1.0 Outdoor GENERAL PRODUCT INFORMATION: CAUTION - RISK OF FIRE This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved. These fixtures are intended to be installed utilizing NEC compliant junction boxes. This product is safety listed for damp locations. Incandescent lamps may be dimmed with a standard incandescent dimmer.
PAGE 2
MISE EN GARDE - RISQUE D'INCENDIE Ce produit doit être installé selon le code d’installation pertinent , par une personne qui connaÎt bien le produit et son fonctionnement ainsi que les risques inhérents Les fils d’alimentation doivent convenir pour 90°c. 1A 3 LUMINAIRE AMPOULE 1 DIFFUSEUR COUVERCLE 2 2 VIS DE COUVERCLE 1 Visser l’ampoules dans les douilles. Reportez-vous à l'étiquette sur la prise de courant pour les informations relatives au débit max.
PAGE 3
ADVERTENCIA - RIESGO DE INCENDIO Este productor debe ser instalado segun el codigo de instalacion aplicable por una persona que conozca la constussion y el funcionamiento del producto y los riesgos que supone. Conductores de alimentacion 90°c Min. 1A 3 LÁMPARA BOMBILLA 1 DIFUSOR CUBIERTA 2 2 TORNILLO DE LA CUBIERTA 1 Enrosque las bombillas en los enchufes. Consulte la etiqueta en el enchufe para obtener información de potencia máxima.