User guide

3
1. Introduction
This Utility Program enables users to find 200Mbps PLC-Ethernet Bridge devices on the
Powerline network, measures data rate performance, ensures privacy and performs
diagnostics by setting user defined secure Powerline networks.
1.1. System Requirements
Operating System Microsoft Windows 2000 , XP , Vista
Browser Microsoft Internet Explorer 5.0 or later.
CPU Intel Pentium III or better, clock rate faster than 2
.0GHz
recommended
RAM At least 128MB
Free Disk Space At least 20MB
Network Interface At least one Fast Ethernet (100 Mbps) net
work card, and
Ethernet Cord
1.2. Installation
First step, you need to verify that there is no any other Powerline Utility installed on
your computer before installing this utility. If there is another utility installed, please
uninstall it and restart your computer.
Second step, please insert the Utility CD-ROM into the computer’s CD-ROM drive.
The CD will launch a IE browser for installation as shown in Figure 1. Click the necessary
link to start installation. If IE browser is not your default browser, please run the
setup.exe at D:\Software\PLC_x86Setup\ (for 32-bit OS) or D:\Software\PLC_x64Setup\
(for 64-bit OS). (Please change D: to your CD-ROM drive).
Follow the steps to install the Utility Program. No password or CD-Key is needed.