Owner manual

10Base-T to 10Base-2 Converter
MDI/MDI-X Connection
The MDI/MDI-X push button alleviates the worry of
cable type configuration when connecting the
converter with another 10Base-T device. Simply refer
to the table below for the correct switch selection:
Connection to Data Terminal
Device Cable Selection
Configuration
Hub or Straight Select
Switch Through MDI
Hub or Crossover Select
Switch MDI-X
DTE Straight Select
(NIC) Through MDI
Crossover Selection Table
10Base-T
MDI-X
MDI
Location of Crossover Switch
-9-