PCI Express Gigabit Ethernet Adapter User's Guide
FCC Certifications This Equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Table of Contents 1. UNPACKING INFORMATION........................... 3 2. OVERVIEW................................................................ 3 2.1 INTRODUCTION ........................................................ 3 2.2 KEY FEATURES ......................................................... 4 2.3 LED DEFINITION..................................................... 4 3. INSTALLING THE PCI EXPRESS GIGABIT ETHERNET ADAPTER ................................................ 5 3.1 SYSTEM REQUIREMENTS .....
1. Unpacking Information Thank you for purchasing this PCI Express Gigabit Ethernet Adapter. Before you start, please verify that your package contains the following items: 1. One PCI Express Gigabit Ethernet Adapter. 2. One Driver/ Manual CD-ROM 2. Overview 2.1 Introduction This PCI Express Gigabit Ethernet Adapter is a high performance Gigabit Ethernet adapter designed for PCI Express Bus, which has better performance than the current PCI interface.
2.2 Key Features ‧ ‧ ‧ ‧ ‧ ‧ ‧ ‧ ‧ ‧ ‧ Compliant with PCI Express 1.0a - x1 PCI Express standard Compliant with CSMA/CD protocol Supports with 10/100/1000 Mbps and Full/Half-Duplex auto negotiation. Fully compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab Support Full Duplex flow control (IEEE 802.3x) Support Auto-MDI/ MDI-X auto crossover. Support Wake-On-LAN ACPI Power Management, compliant to ACPI 2.0 Integrated 128KB Frame Buffer Memory Supports Windows 2000/X64/XP CE FCC, VCCI class B 2.
3. Installing the PCI Express Gigabit Ethernet Adapter 3.1 System Requirements One available PCI Express slot Microsoft Windows 2000/X64 or XP based computer. A CD-ROM Drive 3.2 Hardware Installation Caution: Before installing this adapter, please touch the metal case of your computer to discharge static electricity from your body. We recommend users to install this adapter wearing a wrist strap attaching to your PC chassis. 1.Turn off the computer. 2.Remove the computer’s cover in accordance to its manual.
3.3 Driver Installation After attaching this adapter to your computer, you have to install a driver to activate this adapter. The following instruction uses Windows XP as the presumed operation system. The screens upon installing differ slightly from each operation system but the procedures are familiar. Please refer to the following paragraphs for instruction: 1. Turn your computer on after plugging this adapter to PCI-E slot. The “Found New Hardware Wizard” may pop up.
4. Please wait while installing the driver. 5. Click the “Finish” button to complete driver installation.
6. The system asks for restarting this computer. Click the “Yes” button to complete driver installation.
4. Product Specifications Standard IEEE802.3, 10BASE-T IEEE802.3u, 100BASE-TX IEEE802.3ab, 1000BASE-T IEEE802.
DECLARATION OF CONFORMITY In accordance to EUROPEAN COUNCIL DIRECTIVE 89/336/EEC = European Community Conformity Mark We, Manufacturer/Importer Longshine Technologie (Europe) GmbH An der Strusbek 9 22926 Ahrensburg Germany Declare That The Product LCS-8337TXR PCI Express Gigabit Ethernet Adapter Is In Conformity With: Standards EN 55022:1994+A1:1995+A2:1997, Class B CISPR22 :1993+A1 :1995+A2 :1996, Class B EN 61000-3-2:2000, Class A EN 61000-3-3:1995+A1:2001 EN 55024 :1998+A1 :2001+A2 :2003 IEC 61000-4-2
