Owner's manual

AT Commands for CX930xx Modem Reference Manual
102752B Conexant 3-7
I - Identification
This command causes the modem to reports the requested result according to the
command parameter.
Syntax
I<value>
Defined Values
<value> Decimal number corresponding to the selected information.
0 Reports product code, e.g., “56000”.
1 Reports “OK”.
2 Reports “OK”.
3 Reports masked firmware identification code.
Example:
CX93000-V92
4 Reports “OK”
5 Reports Country Code parameter (see +GCI).
6 Reports “OK”.
7 Reports “OK”.
Result Codes
OK <value> = 0 - 7.
ERROR Otherwise.
+GMI - Request Manufacturer Identification
This command causes the modem to report the modem product manufacturer.
Syntax
+GMI
Typical Response
+GMI: CONEXANT
OK