Owner manual

Commands for Host-Processed Modems Reference Manual
100498E Conexant 4-7
+FTS - Transmit Silence
This command causes the modem to terminate a transmission and wait for <time> 10-ms
intervals before responding with the OK result code.
Syntax
+FTS=<time>
Defined Values
<time> Decimal number from 0 (default) to 255 which specifies the length
of time in 10-ms intervals to delay before responding with the OK
result code after terminating the session.
Result Codes
OK Reported when transmission has been terminated for the specified
amount of time.
ERROR <value> is invalid or this command is issued while the modem is
on-hook.
Reporting Supported Range of Parameter Values
Command: +FTS=?
Response: +FTS: <time> range
Example: +FTS: 0-255