Owner manual

Commands for Host-Processed Modems Reference Manual
4-2 Conexant 100498E
Table 4-1. Fax Class 1 and Fax Class 1.0 Commands
Command/Parameter Function Applicable in
Fax Class 1
Applicable in
Fax Class 1.0
+FCLASS=<class>
Select, read or test service class X X
+FAE=<value> Auto answer enable X X
+FTS=<time>
Stop transmission and pause X X
+FRS=<time>
Wait for silence X X
+FTM=<mod>
Transmit data with <mod> carrier X X
+FRM=<mod>
Receive data with <mod> carrier X X
+FTH=<mod>
Transmit HDLC data with <mod> carrier X X
+FRH=<mod>
Receive HDLC data with <mod> carrier X X
+FAR=<off/on>
Adaptive reception control - X
+FCL=<time>
Carrier loss timeout - X
+FDD=<value>
Double escape character replacement control - X
+FIT=<time>, <action>
DTE inactivity timeout - X
+FPR=<rate> Fixed DTE Rate - X
+FMI
Report manufacturer ID - X
+FMM
Report model ID - X
+FMR
Report revision ID - X
+FLO Flow Control - X
+IFC Local DTE-modem flow control (see +IFC command in
Section 3.2.1)
X X
A Answer (see A command in Section 3.2.3) X X
D <string>
Dial (see D command in Section 3.2.3) X X
H Hangup (see H command in Section 3.2.3) X X
X = Applicable; - = Not applicable