PCIe Parallel Card 2 Ports User Manual Ver. 1.00 All brand names and trademarks are properties of their Respective owners.
Features and Benefits Features z Compliant with PCI Express Base Specification 1.0a z Supports Standard Parallel Port(SPP), Enhanced Parallel Port(EPP) & Enhanced Capability Port(ECP) z Data transfer rate up to 1.
Hardware Installation 1. Turn Off the power to your computer. 2. Unplug the power cord and remove your computer’s cover. 3. Remove the slot bracket from an available PCIe slot. 4. To install the card, carefully align the card’s bus connector with the selected PCIe slot on the motherboard. Push the board down firmly. 5. Connect the system power source to the board’s power connector. 6. Replace the slot bracket’s holding screw to secure the card. 7. Replace the computer cover and reconnect the power cord.
3. Check Specify a location, uncheck the other boxes, then click Next. 4. Insert the Driver CD, type in D:\PCIe\2P\2000, then click OK.
. Click Next and Finish. 6. Restart Windows to complete the installation. For Windows® XP 1. At the Found New Hardware Wizard, select Install from a list or specific location(Advanced), then click Next. 2. Insert the Driver CD, check Include this location in the search, uncheck the other box, type in D:\PCIe\2P\XP, then click OK.
3. If the Hardware Installation window pops up, click Continue Anyway, then Finish. Our driver has been thoroughly tested for stability and compatibility. 4. Repeat steps 1-3 two more times. 5. Restart Windows to complete the installation. For Windows® Server 2003 1. At the Found New Hardware Wizard, select Install from a list or specific location(Advanced), then click Next.
2. Insert the Driver CD, check Include this location in the search, uncheck the other box, type in D:\PCIe\2P\2003, then click OK.
3. If the Hardware Installation window pops up, click Continue Anyway, then Finish. Our driver has been thoroughly tested for stability and compatibility. 4. Repeat steps 1-3 two more times. 5. Restart Windows to complete the installation. To Verify Windows® 2000/XP/Server 20003 Installation 1. Right click My Computer, then click Manage. Click Device Manager. 2. Click on the +(plus sign) in front of Ports(COM & LPT), two NetMos PCI ECP Parallel Port … should be displayed.
3. Double click Multifunction adapters, NetMos 9815 PCI Multi-I/O Controller should be displayed. Change Parallel Port Address Some parallel devices need a specific parallel port in order to work. If your parallel devices works properly, do not change this settings. For Windows® 2000/XP/Server 20003 Installation 1. From the Device Manager window double click Ports(COM & LPT), then double click the NetMos PCI ECP Parallel Port … 2. Click Port Settings tab. 3.
