PS960GLE/ PS965GME Mainboard PS960GLE/ PS965GME Intel® 960GLE + ICH 8M Intel® Celeron® processor FSB 533MHz Intel® 965GME + ICH 8M/ M-E(optional) Intel® Core™ 2 Duo Mobile & Penryn processor FSB 533/800MHz User's Manual Ver. 1.
PS960GLE/ PS965GME Mainboard Things You Have To Know 0 The images and pictures in this manual are for reference only and may vary from the product you received depending on specific hardware models, third party components and software versions. 0 This mainboard contains very delicate IC chips. Always use a grounded wrist strap when working with the system. 0 Do not touch any IC chip, lead, connector or other components.
PS960GLE/ PS965GME Mainboard Index CHAPTER 1 GETTING STARTED ...............................................................................1 1.1 INTRODUCTION ....................................................................................................1 1.2 SPECIFICATION ....................................................................................................2 1.2.1 CPU ........................................................................................................................
PS960GLE/ PS965GME Mainboard Connectors............................................................................................................................... 12 1.4.14 KBMS1: Mini-DIN PS/2 Port.......................................................................................... 12 1.4.15 CON3/ CON4: COM3/ 4/ 5/ 6 Port ................................................................................ 12 1.4.16 PRT1: LPT PORT .......................................................................
PS960GLE/ PS965GME Mainboard Chapter 1 Getting Started 1.1 Introduction ® Thanks for choosing PS960GLE/ PS965GME Mainboard. It is based on Intel 960GLE/ 965GME ® Northbridge chipset and Intel ICH 8M/ M-E(optional) Southbridge chipset. In addition, it also supports ® ® integrated Intel 960GLE/ 965GME Graphics Engine for onboard graphics feature. It supports Intel ® ® Celeron processor by 960GLE; supports Intel Core™ 2 Duo Mobile & Penryn processor by 965GME.
PS960GLE/ PS965GME Mainboard 1.2 Specification 1.2.1 CPU ® ® Support Intel Celeron processor w/ FSB 533MHz (PS960GLE) Support Intel Core™ 2 Duo Mobile & Penryn processor w/ FSB 533/800MHz (PS965GME) ® 1.2.
PS960GLE/ PS965GME Mainboard 1.2.5 LAN - Realtek® RTL8111C ® PCI-E Realtek Giga LAN Ethernet LAN RJ45 Connector with link/act and speed LED integrated 1.2.6 Slot One standard 32-bit Mini PCI slot for Mini PCI standard expansion card Supporting one-way bandwidth up to 33 MB/s 1.2.7 Mini-IDE Connector One Mini-IDE Connector for two Mini-IDE 44pin hard disk drives CF card type I/II Ultra ATA 33/66/100 MHz High capacity hard disk drives 1.2.
PS960GLE/ PS965GME Mainboard 1.2.11 BIOS Phoenix-Award™ BIOS 1.2.12 Hardware Monitor Monitor CPU temperature and FAN speed Monitor system voltages 1.2.
PS960GLE/ PS965GME Mainboard 1.3 Configuration 1.3.
PS960GLE/ PS965GME Mainboard 1.4 Hardware Installation This section will assist you in quickly installing your system hardware. Wear a wrist ground strap before handling components. Electrostatic discharge may damage the system's components. Jumpers 1.4.1 JP1: Clear CMOS Jumper The "Clear CMOS" function is used when you are unable boot your system and need to reset the BIOS settings (CMOS settings) back to the manufacturer's original settings.
PS960GLE/ PS965GME Mainboard 1.4.2 JP2: CF Card Master/ Slave Jumper This Jumper is to select the CF works on Secondary Channel master device or Slave device. JP2 Assignment Pin 1-2 Closed Slave (Default) Pin 2-3 Closed Master 1.4.3 JP3: LVDS VDD POWER It’s for LVDS VDD power setting. JP3 Assignment Pin 1-2 Closed 5V Pin 2-3 Closed 3V (Default) 1.4.4 JP4: USB POWER +5V or +5V STB for USB JP4 Assignment Pin 1-2 Closed 5V (Default) Pin 2-3 Closed 5V STB 1.4.
PS960GLE/ PS965GME Mainboard 1.4.6 JP7: RJ12 POWER It’s for RJ12 power setting. JP7 Assignment Pin 1-2 Closed 24V (Default) Pin 2-3 Closed 12V 1.4.7 JP8: MINI PCI ON/OFF It’s for MINI PCI ON/OFF setting. JP8 Assignment Pin 1-2 Closed OFF Pin 1-2 Open On (Default) 1.4.8 JP9: EXT. Audio It’s for EXT. Audio setting. JP9 Pin 1 2 3 4 Assignment CON_R CON_L +5V GND 1.4.9 CN1 - 6: RS-232 Voltage Setting It’s for RS-232 Voltage setting.
PS960GLE/ PS965GME Mainboard 1.4.10 CN12: AUDIO OUTPUT SELECT It’s for audio output select setting. CN12 Assignment Pin 1-3 & 2-4 Closed Audio Connector Pin 3-5 & 4-6 Closed JP9 The default setting is “Pin 1-3 & 2-4 Closed“. 1.4.11 CN13: KB/MS The following table shows the pin outs of the INT_KBMS connectors. Pin 1 3 5 7 9 Assignment KBDATA_C KBCLK_C +5V MSDATA_C MSCLK_C The default setting is “Pin 1-2, 3-4, 7-8, 9-10 Closed“.
PS960GLE/ PS965GME Mainboard 1.4.
PS960GLE/ PS965GME Mainboard 1.4.13 CN8 FPSWLED: Front Panel Headers This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, and speaker connection. It allows user to connect the PC case’s front panel switch functions.
PS960GLE/ PS965GME Mainboard Connectors 1.4.14 KBMS1: Mini-DIN PS/2 Port This mainboard provides a standard Mini-DIN PS/2 port to connect PS/2 keyboard and mouse. Pin 1 3 5 Assignment Keyboard/ Mouse data GND Keyboard/ Mouse clock Pin 2 4 6 Assignment N/C 5V GND 1.4.15 CON3/ CON4: COM3/ 4/ 5/ 6 Port A 9-pin D-Sub male connector is the serial port. The following table shows its pin assignments.
PS960GLE/ PS965GME Mainboard 1.4.16 PRT1: LPT PORT The following table shows its pin assignments. Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 Assignment RSTBRPDR0 RPDR1 RPDR2 RPDR3 RPDR4 RPDR5 RPDR6 RPDR7 P_ACKP_BUSY P_PE P_SLCT Pin 14 15 16 17 18 19 20 21 22 23 24 25 Assignment RAFDP_ERRRINIT_PRSLINGND GND GND GND GND GND GND GND 1.4.17 RJ12 The following table shows its pin assignments.
PS960GLE/ PS965GME Mainboard 1.4.18 VGA1: VGA Connector The mainboard provides one VGA connector (= D-Sub connector) on back panel. VGA connector (= D-Sub connector) delivers the analogy signals, and is able to connect with traditional CRT display, flat display, or other display device which with the D-Sub interface compatible. Pin 1 2 3 4 5 6 7 8 9 10 Assignment RED GREEN BLUE N/A GND GND GND GND NVGA03 GND 11 N/A 12 DDC_DATA 13 5VHSYNC 14 5VVSYNC 15 DDC_CLK 1.4.
PS960GLE/ PS965GME Mainboard 1.4.20 USB1: USB Port There are 4 USB 2.0/ 1.1 ports. These USB ports are used to attach with USB devices, such as keyboard, mouse and other USB supported devices. 1.4.21 SNDCN2 1.4.22 COM1/ COM2: COM Port This mainboard provides four COM pin headers for you to connect additional serial connectors on your case back panel. Attach cables of serial connectors onto these headers, then you can use the serial connectors connecting with a mic, modem or other peripheral device.
PS960GLE/ PS965GME Mainboard 1.4.23 CN14: 8-bit GPIO 8-bit General Purpose Input/Output Pin 1 3 5 7 9 Assignment DIO_0 DIO_2 DIO_4 DIO_6 GND Pin 1 2 3 4 Assignment CDL CDG CDG CDR Pin 2 4 6 8 10 Assignment DIO_1 DIO_3 DIO_5 DIO_7 +5V 1.4.24 CDIN1 1.4.25 SPDIF S/PDIF specifies a Data Link Layer protocol and choice of Physical Layer specifications for carrying digital audio signals between devices and stereo components over either optical or electrical cable.
PS960GLE/ PS965GME Mainboard 1.4.26 USB2/ USB3: USB Connector These USB ports are used to attach with USB devices, such as keyboard, mouse and other USB supported devices. Pin 1 3 5 7 9 Assignment N/C GND DB+ DBVCC Pin 2 4 6 8 10 Assignment VCC DADA+ GND N/C 1.4.27 SATA1/ SATA2/ SATA3 Pin 1 2 3 4 5 6 7 Assignment GND SATA_TX+ SATA_TXGND SATA_RX+ SATA_RXGND 1.4.28 IDE1: Mini-IDE Connector The mainboard provides one Mini-IDE connector that supports Ultra ATA 100/ 66/ 33 Mini-IDE device.
PS960GLE/ PS965GME Mainboard 1.4.29 CON2: LVDS Pin 2 4 6 8 10 Assignment Pin +12V/+5V 1 GND 3 LCDVDD 5V/3.3V 5 GND 7 BCKLITE_ON 9 Assignment +12V/+5V GND LCDVDD 5V/3.
PS960GLE/ PS965GME Mainboard 1.4.30 DDRII1/ DDRII2: Memory Installation The PS960GLE/ PS965GME provides the DDR II SO-DIMM socket which allows you to install 200-pin SO-DIMM. Memory Installation Steps 1. Match the notch on the bottom of the DIMM module with the corresponding pattern in the DIMM slot. This will ensure that the module will be inserted with the proper orientation. Now the chips or pins at the bottom of the DIMM module are still visible. 2.
PS960GLE/ PS965GME Mainboard 1.4.31 PWR1: ATX Power Connector This mainboard provides one ATX connector. You must attach it before the system is powered on. This power connector supports several power management functions such as the instant power-on function. The connector pins are described below. Pin 13 14 15 16 17 Assignment 3.3V -12V COM PS-ON COM Pin 1 2 3 4 5 Assignment 3.3V 3.
PS960GLE/ PS965GME Mainboard 1.4.33 MINI_PCI1: Mini PCI Slot Mini PCI (Peripheral Component Interconnect) is a 32-bit, 33MHz bus standard for integrated peripherals of smaller products. The mainboard provides one Mini PCI slot available to install expansion cards such as network card, SCSI card, etc. 2 1 1.4.34 CON1: CF Card Connector The mainboard provides one CF card connector (CompactFlash I/II Card).
PS960GLE/ PS965GME Mainboard 2.3 Main Menu The Award BIOS (Basic Input/Output System) installed in your computer system’s. The BIOS provides for a standard device such as disk drives, serial ports and parallel ports. It also adds password protection as well as special support for detailed fine-tuning of the chipset controlling the entire system. The Award BIOS provides a Setup utility program for specifying the system configurations and settings. The BIOS ROM of the system stores the Setup utility.
PS960GLE/ PS965GME Mainboard 2.3.1 Standard CMOS Features Include all the adjustable items in standard compatible BIOS. “Standard CMOS Features” allows you to record some basic hardware configurations in your computer system and set the system clock and error handling. If the CPU card is already installed in a working system, you will not need to select this option.
PS960GLE/ PS965GME Mainboard Time The time format is: Hour : 00 to 23 Minute : 00 to 59 Second : 00 to 59 To set the date & time, highlight the “Date” & “Time” and use the / or +/- keys to set the current time. IDE Channel 0 Master/ Slave The onboard PCI IDE connectors provide Primary and Secondary channels for connecting up to four IDE hard disks or other IDE devices. Each channel can support up to two hard disks; the first is the “Master” and the second is the “Slave”.
PS960GLE/ PS965GME Mainboard Video This field selects the type of video display card installed in your system. You can choose the following video display cards: EGA/VGA For EGA, VGA, SEGA, SVGA or PGA monitor adapters. (default) CGA 40 Power up in 40 column mode. CGA 80 Power up in 80 column mode. MONO For Hercules or MDA adapters. Halt On This field determines whether or not the system will halt if an error is detected during power up.
PS960GLE/ PS965GME Mainboard 2.3.2 Advanced BIOS Features Include all the adjustable items of Award special enhanced features. CPU Feature Press Enter to configure the settings relevant to CPU Feature. Removable Device Priority Press Enter to configure the settings relevant to Removable Device Priority. Hard Disk Boot Priority It allows you to set the priority for hard disk boot.
PS960GLE/ PS965GME Mainboard CD-ROM Boot Priority Press Enter to configure the settings relevant to CD-ROM Boot Priority. Network Boot Priority Press Enter to configure the settings relevant to Network Boot Priority. Virus Warning If enabled, an alarm message will be displayed when trying to write on the boot sector or on the partition table on the disk, which is typical of the virus. CPU L3 Cache It allows you to activate the CPU L3 Cache. Setting: Disabled, Enabled (Default).
PS960GLE/ PS965GME Mainboard Boot Other Device It allows the system to search for an OS from other devices other than the ones selected in the First/ Second/ Third Boot Device. Setting: Disabled, Enabled (Default). Boot Up NumLock Status It allows you to activate the NumLock function after you power up the system. Setting: Off, On (Default). Gate A20 Option Setting: Normal, Fast (Default).
PS960GLE/ PS965GME Mainboard Security Option It allows you to limit access to the System and Setup. When you select System, the system prompts for the User Password every time you boot up. When you select Setup, the system always boots up and prompts for the Supervisor Password only when the Setup utility is called up. Setting: Setup (Default), System. APIC Mode APIC stands for Advanced Programmable Interrupt Controller. Setting: Disabled, Enabled (Default). MPS Version Control For OS Setting: 1.1, 1.
PS960GLE/ PS965GME Mainboard Small Logo(EPA) Show The EPA logo appears at the right side of the monitor screen when the system is boot up. Setting: Disabled (Default), Enabled. Summary Screen Show Setting: Disabled, Enabled (Default).
PS960GLE/ PS965GME Mainboard 2.3.3 Advanced Chipset Features Include all the adjustable items of chipset special features. DRAM Timing Selectable It refers to the method by which the DRAM timing is selected. Setting: Manual, By SPD (Default). CAS Latency Time It allows CAS latency time in HCLKs as Auto, 3, 4, 5, 6 and 7. The system board designer should set the values in this field, depending on the DRAM installed.
PS960GLE/ PS965GME Mainboard DRAM RAS# to CAS# Delay It allows you to insert a delay between the RAS (Row Address Strobe) and CAS (Column Address Strobe) signals. This delay occurs when the SDRAM is written to, read from or refreshed. Reducing the delay improves the performance of the SDRAM. Setting: Auto (Default), 2, 3, 4, 5, 6. DRAM RAS# Precharge It sets the number of cycles required for the RAS to accumulate its charge before the SDRAM refreshes. Setting: Auto (Default), 2, 3, 4, 5, 6.
PS960GLE/ PS965GME Mainboard Memory Hole At 15M-16M In order to improve performance, certain space in memory can be reserved for ISA cards. This memory must be mapped into the memory space below 16 MB. Setting: Disabled (Default), Enabled. On-Chip Frame Buffer Size Setting: 1MB, 8MB (Default). DVMT Mode Setting: FIXED, DVMT (Default). DVMT/FIXED Memory Size Setting: 128MB (Default), 256MB, Max. Boot Display Setting: Auto, CRT, LFP, CRT+LFP (Default). Panel Scaling Setting: Auto (Default), On, Off.
PS960GLE/ PS965GME Mainboard 2.3.4 Integrated Peripherals Include all onboard peripherals. OnChip IDE Device >>> IDE HDD Block Mode It allows HDD controller to use the fast block mode to transfer data to and from HDD. Setting: Disabled, Enabled (Default).
PS960GLE/ PS965GME Mainboard On-Chip Primary/Secondary PCI IDE The integrated peripheral controller contains an IDE interface with support for two IDE channels. Select Enabled to activate each channel separately. Setting: Disabled, Enabled (Default). IDE Primary Master/Slave PIO It allows your system HDD controller to run faster.
PS960GLE/ PS965GME Mainboard Onboard Device >>> Audio Device Setting: Enabled (Default), Disabled. Onboard Lan Controller Setting: Enabled (Default), Disabled. SuperIO Device >>> Onboard Serial/Parallel Port It allows you to select the onboard serial and parallel ports with their addresses.
PS960GLE/ PS965GME Mainboard Parallel Port Mode Setting: Standard (Default) EPP1.9+SPP ECP ECP+EPP1.9 Printer EPP1.7+SPP ECP+EPP1.7 ECP Mode Use DMA Setting: 1, 3 (Default). PWRON After PWR-Fail It sets the system power status whether on or off when power returns to the system from a power failure situation. Setting: Off, On, Former-Sts (Default).
PS960GLE/ PS965GME Mainboard USB Device Setting >>> USB 1.0 Controller Setting: Disabled, Enabled (Default). USB 2.0 Controller For using USB 2.0, it is necessary OS drivers must be installed first. Please update your system to at least Windows 2000 SP4 or Windows XP SP2. Setting: Disabled, Enabled (Default). USB Operation Mode Setting: Full/Low Speed, High Speed (Default) USB Keyboard Function Setting: Disabled, Enabled (Default).
PS960GLE/ PS965GME Mainboard USB Mouse Function Setting: Disabled, Enabled (Default). USB Storage Function Setting: Disabled, Enabled (Default).
PS960GLE/ PS965GME Mainboard 2.3.5 Power Management Setup Include all the adjustable items of Green function features. ACPI Function It supports ACPI (Advance Configuration and Power Interface). Setting: Enabled (Default), Disabled. ACPI suspend Type Setting: S1(POS) (Default), S3(STR), S1&S3.
PS960GLE/ PS965GME Mainboard Power Management It allows you to select the type of power saving management modes. Setting: User Define Each of the ranges is from 1 min. to 1hr. Except for HDD Power Down which ranges from 1 min. to 15 min Min Saving (Default) Minimum power management Max Saving Maximum power management Video Off Method It defines the Video Off features.
PS960GLE/ PS965GME Mainboard Suspend Mode When “Enabled”, after the set time of system inactivity, all devices except the CPU will be shut off as the set time. Setting: Disabled (Default), 1 Min, 2 Min, 4 Min, 8 Min, 12 Min, 20 Min, 30 Min, 40 Min, 1 Hour. HDD Power Down When “Enabled”, after the set time of system inactivity, the hard disk drive will be powered down while all other devices remain active. Setting: Disabled (Default), 1 Min - 15 Min.
PS960GLE/ PS965GME Mainboard Soft-Off by PWR-BTTN It defines the power-off mode when using an ATX power supply. In the Instant Off mode, it allows powering off immediately upon pressing the power button. In the Delay 4 Sec mode, the system powers off when the power button is pressed for more than 4 seconds or enters the suspend mode when pressed for less than 4 seconds. Setting: Instant-off (Default), Delay 4 Sec. .
PS960GLE/ PS965GME Mainboard 2.3.6 PnP/PCI Configurations Include all configurations of PCI and PnP resources. Init Display First Setting: PCI Slot (Default), Onboard. PCI/VGA Palette Snoop Some non-standard VGA display cards may not show colors properly. It allows you to set whether or not MPEG VGA cards can display with PCI/VGA. When “Enabled”, a PCI/VGA can display with an MPEG VGA card. When “Disabled”, a PCI/VGA cannot display with an MPEG VGA card. Setting: Disabled (Default), Enabled.
PS960GLE/ PS965GME Mainboard 2.3.7 PC Health Status It is for monitoring the system status such as temperature, voltage, and fan speeds. CPU smart Fan Temperature Setting: Disabled, 40℃/104°F, 45℃/113°F, 50℃/122°F (Default). Smart Fan Tolerance Value Setting: Min. is 1, Max. is 5.
PS960GLE/ PS965GME Mainboard 2.3.8 Frequency/Voltage Control It can load Frequency/ Voltage Control setup. Spread Spectrum It sets the value of the spread spectrum. It is for CE testing use only. Setting: Disabled, Enabled (Default).
PS960GLE/ PS965GME Mainboard 2.3.9 Load Fail-Safe Defaults It can load Fail-Safe defaults except standard CMOS setup.
PS960GLE/ PS965GME Mainboard 2.3.10 Load Optimized Defaults It can load the preset system parameter values to set the system in its best performance configurations.
PS960GLE/ PS965GME Mainboard 2.3.11 Set Password Set change or disable password. It allows you to limit access to the system and/or BIOS setup. Useing Password to set a password that will be used exclusively on the system. To specify a password, highlight the type you want and press . The Enter Password: message prompts on the screen. Type the password, up to eight characters in length, and press . And the system confirms your password by asking you to type it again.
PS960GLE/ PS965GME Mainboard 2.3.12 Save & Exit Setup Save CMOS value settings to CMOS and exit setup. Typing “Y”, you will quit the setup utility and save all the changes into the CMOS memory. Typing “N”, you will return to Setup utility.
PS960GLE/ PS965GME Mainboard 2.3.13 Exit Without Saving Abandon all CMOS value changes and exit setup. Typing “Y” will quit the Setup utility without saving the modifications. Typing “N” will return you to Setup utility.
