Manual

COBRA15
26 Version: 1.0
2.3 Hardware assembly
Please make sure that the system power is turned off and the power supply is disconnected when
making any hardware changes to COBRA15.
2.3.1 HDD + SSD
Step 4: Then remove HDD or SSD
from the tray.
Step 2: Please pull out and retrieve
HDD or SSD.
Step 6: Please tighten left and right
screws indicated below to fix HDD or SSD
in place
.
Step 1: Please remove the HDD
screw.
Step 3: Dismounting HDD from the tray
requires two screws to be removed.
Step 5: Please insert new HDD or SSD
into the tray.