User Instructions

Smart remote instruction
Afer successfully adding the device, you can edit device name and binding the application
environment, click “save”, change into main interface for customer to use or pair with
remote.
b．Take smart lighting device for example to connect with remote:
Click the icon "add device" to enter the ‘Add Manually’ interface, select the corresponding
lithting type, also you can open your phone bluetooth to quickly add device.
c. Ensure the device is switched on, observe whether lighting status is flashing rapidly, if not,
you must repeat three cycles to switch device on and off(best time between each action
is less than one second) till it change into flashing that represents into network matching
ready status.,click the’next’ icon, automatically complete finding device-> register on
cloud->device reset mode,During this period, no need any operation, just need 30~60s
waiting(Up to your router and network signal strength) till appear connecting 100%
complete ,device stop flashing enter always on state represents succeed,