User Instructions

Smart remote instruction
8、 Add device to network
Ensure the mobile device is in the normal Wifi connection state and the signal is good,Just
support 2.4GHz wifi model.
a. click the icon "add device" to enter the ‘Add Manually’ interface,
Take smart plug for example to connect with remote
Select the corresponding Wifi socket type, also you can open your phone bluetooth to
quickly add device.
b. Ensure the device is switched on, observe whether plug status Red LED is flashing, if not,
you must push the power button more than 5 seconds until the led change into flashing
that represents into network matching ready status.,click the’next’ icon, automatically
complete finding device-> register on cloud->device reset mode,During this period, no
need any operation, just need 30~60s waiting(Up to your router and network signal
strength) till appear connecting 100% complete ,red led will stop flashing enter put out
state, At this time,click the power button the led will change to blue color, the blue red
represents device working status