Manual
160PI/200PI/250PI AC/DC Series IGBT Machines
www.longevity-inc.com 9
DC TIG (GTAW)
Current Down-Slope Time 0-10 Seconds
Pulse Width Ratio 0.1 – 0.9
Pulse Frequency 0.5-25Hz
Post Flow Time 1 – 25 Seconds
Remote Control/Pedal Yes
Arc Starting Mode High Frequency (No Contact Required)
AC/DC
ARC/STICK
No Load Voltage 60 – 80V
Base Current Adjusting Range
(Amps)
5 – 160A 5 – 160A 10 – 200A
Rated Output Current (Amps) 160A 160A 200A
Rated Duty Cycle at Max
Amps
60%
AC/DC PLASMA
CUTTER
Base Current Range (Amps) 20 – 40A 20 – 50A 20 – 50A
Rated Duty Cycle at Max
Amps
60%
Arc Starting Method Pilot Arc (Continuous Arc)