Specification

Watch on YouTube.
Watch on YouTube.
www.longevity-inc.com
60 AMP IGBT PLASMA CUTTER CNC READY
Built in gas/air filter and regulator provides air filtration of
airborne particles to keep the ForceCut 62i cutting clean
and efficiently.
Built In Air Filter And Regulator D.
On out-of-date plasma cutters, when the arc is
interrupted the trigger must be disengaged to restart the
arc. With the ForceCut® 62i plasma cutter, the Pilot Arc
system automatically senses loss of voltage, and
re-ignites the Pilot Arc allowing for the torch head to
maintain an arc when cutting. This is effective allowing
you to not worry about the cutting height, cut speed, and
it allows you to cut expanded metal. Pilot Arc technology
allows for you to always have power to the arc which
increases your cutting speed and assists with uneven
cutting surfaces.
Pilot Arc C.
The ForceCut® 62i starts the arc by creating an internal
spark to ignite the plasma arc. By using air pressure to
move the electrode against the nozzle, the ForceCut® 62i
creates the arc without any need for high frequency. This
allows for easier CNC table integration without the worry
of interference.
Blowback Arc Start/CNC ReadyE.
62 i
PT-60 Torch
INCLUDED:
QUICK CONNECT
Ground Clamp
Consumables
Ground/Earth
Cable
Auto-Dark Helmet
. PowerView Elite
Consumables
Welding Cart
CNC Torch
OPTIONAL EQUIPMENT:
PTM-60
. Contact Tips
. Electrodes
. Caps
. Roller Guides
. Torch Spacers
IGBT
HIGH
OUTPUT
PLASMA
BLOW BACK
PILOT
OPTIONAL CNC PTM-60
PLASMA TORCH!!!