TigWeld 200EX 200amp AC/DC TIG Welder Operating Manual For TigWeld 200EX 200 AMP AC/DC Pulse TIG Welder and AC/DC Stick Welder ~1~
TigWeld 200EX 200amp AC/DC TIG Welder Table of Contents: PG. 3: Thank you From LONGEVITY PG. 4-6: Warranty/Shipping Damage/Order Information PG. 7-9: Warning and Safety Information PG. 10: Specifications and Ratings PG. 11: Specifications and Ratings PG. 12: Connecting your Welder PG. 13-16: Front Panel Overview PG. 17: Enjoy your new welding machine from LONGEVITY! PG.
TigWeld 200EX 200amp AC/DC TIG Welder THANK YOU! We, at LONGEVITY, want to thank you for purchasing our product. You are almost ready to experience Longevity Welding first hand. Longevity definitely appreciates your business and understand that this equipment may be overwhelming to setup and operate so we have prepared a manual that will assist you in understand your new plasma cutter/welder.
TigWeld 200EX 200amp AC/DC TIG Welder Longevity Global, Inc. 23591 Foley St Hayward, CA 94545 Toll-Free Customer Support: 1-877-LONG-INC / 1-877-566-4462 Website: www.longevity-inc.com Sales: sales@longevity-inc.com Customer Service: help@longevity-inc.com Dealers: dealers@longevity-inc.com Complaints: complaints@longevity-inc.
TigWeld 200EX 200amp AC/DC TIG Welder Warranty LONGEVITY Plasma Cutters, Welders, and Multi-Purpose Welders are covered for specific Parts and Labor warranty at our facility. For detailed information regarding your specific LONGEVITY welder or cutter, please view our Terms and Policies page on our website at the following website link: http://www.longevity-inc.com/terms/. Shipping Damage Your machine is insured against damage during shipping.
TigWeld 200EX 200amp AC/DC TIG Welder In Warranty Service Customers, who own machines that are in warranty and require service, should contact our Warranty Department by email at help@longevity-inc.com to obtain a return authorization code. In addition to the warranty we offer, we would like for you to register your product on our website at www.longevity-inc.com/resources. Remember, warranty starts from the date of purchase.
TigWeld 200EX 200amp AC/DC TIG Welder Warnings and Safety Welding and plasma cutting may be dangerous to the operator and to bystanders, if the equipment is not operated properly. Welding or cutting must be performed in accordance with all relevant safety regulations. Carefully read and understand this instruction manual before installing and operating this equipment. Changing function modes during welding may damage equipment. Before welding, disconnect the electrode-holder cable from the equipment.
TigWeld 200EX 200amp AC/DC TIG Welder Ensure that people in or near the working area are protected. Welding splash is a fire hazard. Keep flammable material away from the work place. Keep a fire extinguisher nearby, and have all personnel trained in its use. Surface noise generated while welding or cutting can be harmful to hearing. In the event of a machine fault. Refer to this instruction manual. If the fault cannot be determined, contact your local dealer or supplier for assistance.
TigWeld 200EX 200amp AC/DC TIG Welder Safety Tips Consider the following tips to ensure safe operation of your welding/cutting equipment: Ensure that this welding equipment is installed in an area free of corrosive chemical gases, flammable gases or materials, and explosive chemicals. The area should contain little dust, and have a humidity of no more than 80%. Operate the welding equipment in an area sheltered from direct sunlight and precipitation.
TigWeld 200EX 200amp AC/DC TIG Welder If, after reviewing this manual, you have any problems in setting up or operating your machine, contact us at help@longevity-inc.com.
TigWeld 200EX 200amp AC/DC TIG Welder Specifications Models TigWeld 200EX Parameters Input power 1~220±10%，50Hz Rated input current（A） 35.4（TIG） 39.5（STICK） Rated input power（KW） 5.2（TIG） 6.4（STICK） Power factor 0.
TigWeld 200EX 200amp AC/DC TIG Welder Operation Layout for the panel 1 Positive Welding Terminal: Positive polarity output. It is important that the plug be inserted and secured. 2 8 pin Control Socket: Is used to connect either to the trigger switch on the TIG torch, or to the foot pedal 3 Negative Welding Terminal: Negative polarity output. It is important that the plug be inserted and secured. 4 Shielding gas connector: 5 Power source switch: Is connected to the gas input pipe of torch.
TigWeld 200EX 200amp AC/DC TIG Welder Overview .(1) AC/DC Selection Button AC welding DC welding (2) 2T/4T Selection Button 2T Mode 4T Mode (3) Gas-test Button Lights up when Gas-test key is selected, after that gas will flow out for 15 seconds. Press the button again to stop the gas flow before the 15 seconds are up. (4) HF (high-frequency) ignition Button Lights up when High frequency key is pressed, HF (high-frequency) ignition has been selected.
TigWeld 200EX 200amp AC/DC TIG Welder (8) Adjusting dial If the parameter indicator lights up, then the selected parameter can be altered on adjusting dial. WC WC DS UPS PF PF SA AC PW BC PF Available parameters where 2T and 4T mode have been selected: PF Gas pre-flow time Unit Seconds Setting range 0.1—1 Factory setting 0.
TigWeld 200EX 200amp AC/DC TIG Welder PF Pulse frequency Unit Hz Setting range 0.5—200 Factory setting 0.5 Important! Only selectable when “pulse key” has been pressed. DS Downslope time Unit Seconds Setting range 0—10 Factory setting 0 AC Arc current (only with 4T) Unit Seconds Setting range 5—100% of main current WC (DC)；10—100% of main current WC (AC) Factory setting 5 PF Gas post-flow time Unit Seconds Setting range 0.
TigWeld 200EX 200amp AC/DC TIG Welder (10) Power/Alarm indicator Power Indicator Light Indicates if the welder reaches its duty cycle, or if the machine senses over-voltage or over-current. At the same time “Err 001.
TigWeld 200EX 200amp AC/DC TIG Welder LONGEVITY® Global, Inc. thanks you for your purchase and the opportunity to be able to serve you. If, after reviewing this manual, you have any problems in setting up or operating your machine, contact us at help@longevity-inc.com. LONGEVITY® Global, Inc. Toll-Free 1-877-LONG-INC / 1-877-566-4462 Website: www.longevity-inc.com Sales: sales@longevity-inc.com Customer Service: help@longevity-inc.com Dealers: dealers@longevity-inc.
1~220V F K F2 F1 ~ 18 ~ H Hall K power switch L inductance ST soft start box B3 C1 、 C2 electrolytical capacitor VC C2 C1 SS P positive output T1 rectifier B1 N negative output B1 main transformer 20-lead socket CONTROL P CB4 DRIVE DRIVER T2 INVERTER P CB2 T2 IGBT SOU POWER B2 high frequency transformer ST RECTIFIER P CB1 F fuse DC B3 switch power supply transformer T3 fast recovery diode GD1 GD2 F1 、 F2 fan 20-lead socket AC DRIVE P CB6 ACOUT SOU1 VOLTAGE TEST P
