Specification

The Power to last!
R
R
-
PT-60 Torch
20ft
INCLUDED:
On out-of-date plasma cutters, when the arc is
interrupted the trigger must be disengaged to restart the
arc. With the ForceCut® 42i plasma cutter, the Pilot Arc
system automatically senses loss of voltage, and
re-ignites the Pilot Arc allowing for the torch head to
maintain an arc when cutting. This is effective allowing
you to not worry about the cutting height, cut speed, and
it allows you to cut expanded metal. Pilot Arc technology
allows for you to always have power to the arc which
increases your cutting speed and assists with uneven
cutting surfaces.
C. Pilot Arc
The ForceCut® 42i starts the arc by creating an internal
spark to ignite the plasma arc. By using air pressure to
move the electrode against the nozzle, the ForceCut® 42i
creates the arc without any need for high frequency. This
allows for easier CNC table integration without the worry
of interference.
D. Blowback Arc Start / CNC Ready
Built in gas/air filter and regulator provides air filtration of
airborne particles to keep the ForceCut 42i cutting clean
and efficiently.
E. Built In Air Filter And Regulator
The Euro style quick-connect oers
ecient and safe interchangeability
with aftermarket torches like Tramet®.
QUICK CONNECT
110/220 Power
Plug Adapter
Consumables
10 ft Ground/Earth
Cable
40 AMP IGBT PLASMA CUTTER WITH PFC
42i
IGBT
HIGH
OUTPUT
PFC
110/220V
PLASMA
BLOW BACK
PILOT
CNC
PORT
®