User's Manual

5. Adjust the distance between the
brackets to fit the mounting surface.
6. Securely tighten all captive screws.
7. In a clockwise motion, turn the
thumbscrew into the non-foam
padded mounting bracket.
8. Attach and screw the thumbscrew
clamp foot to the thumbscrew.
9. Holding the transmitter steady, po-
sition the foam padded side of the
mounting bracket onto the bottom
of the mounting surface.
10. In a clockwise motion, screw the
thumbscrew onto the mounting sur-
face, such that the transmitter is po-
sitioned firmly onto the surface.
Long Range Systems 6 T9601 User Manual
Thumbscrew Clamp Foot
Turn Clockwise to Tighten
Turn Counter-
Clockwise to
Loosen