User's Manual

Assign Manager Pager
A manager pager can be assigned to notify a manager what station they are needed at when a page is re-
ceived. Only LRS alphanumeric pagers (rechargeable and battery operated) can be set as manager pagers.
Set Manager Pager
1. Press PROG
2. Enter 9 - 8 - 5
3. Press ENT
4. At Ngr (manager), enter the pager number
5. Press ENT
NOTE: Manager pager cannot be disabled. However, you can reassign manager pager to a differ-
ent pager number. To reassign, follow the steps for setting manager pager and enter a dif-
ferent pager number.
System Specifications
Notice: Operation is subject to the following:
• This device may not cause interference.
• This device will accept any interference including interference that may cause undesired oper-
ation of the unit.
T9601
Required Voltage: One-110V outlet for the T9601 transmitter
(Batteries: This option currently NOT available)
Operating Frequency: 467.750MHz
Radiated Power: <4900 micro-volts/meter
Operating Range: Dependent upon the paging environment
Long Range Systems 18 T9601 User Manual