User's Manual

Programming Pagers
If a new pager number needs to be assigned to a pager, Star (SP5) and Alpha pagers can be reprogrammed
from the T9601 transmitter. If you would like to assign or reassign numbers to pagers, contact LRS to verify
your restaurant ID before proceeding.
To Program Pagers:
1. Be sure the POCSAG start is correct for programming pager types (see “Set POCSAG Start” pg. 14)
2. Pagers:
• Remove rechargeable pagers from the charger (or reset by touching the silver nodes on the
pager to the reset terminal on the transmitter) and wait until it stops vibrating
• Turn battery powered pagers on and then off (or remove and reinstall the battery) and wait until
it stops vibrating and/or beeping
4. Press PROG
5. Enter the number you wish to assign to the pager (Choose #: 1 - 999)
6. Press PROG
• Star pagers will slowly vibrate and light up then dim to off
• Alpha pagers will beep 4 times and then stop
7. Once programming is complete, page the pager to ensure it is programmed correctly
(See “Basic Paging Operations” p. 9)
Top View of the T9601
Long Range Systems 17 T9601 User Manual
Reset Terminals Marker Holder
Antenna