User's Manual

Maintenance Checks
Range Test
Perform a range test to determine the effective range of the T9601.
N
OTE: Be sure to remove pagers from the charging base before performing the range test.
1. Press PROG - 9 - 9 - 7 - ENT
2. The screen will display “tst” and then a “-” (dash) will appear
3. When the “-” (dash) begins scrolling across the screen, pagers will vibrate every 5 seconds (as long
as they are receiving the signal)
4. Take a pager and walk around the area to verify the pager operates in all areas (the pager will stop
vibrating when it is out of range)
5. Press ENT To stop the range test
Anti-Theft
Anti-theft is used to alert staff carrying alpha pagers that they are leaving the premises while still carrying
the pager.
NOTE: Anti-Theft only works with alphanumeric pagers.
To Turn On:
1. Press PROG
2. Enter 9 - 9 - 9
3. Press ENT
To Turn Off:
1. Press PROG
2. Enter 9 - 9 - 8
3. Press ENT
When Activated:
• The transmitter sends a signal to alpha pagers, and if the signal is not received, the pager will
emit a continuous beep sound until it is returned to the charging unit or is back within range.
• The LED screen on the alphanumeric pagers will display “OUT OF RANGE”.
Cleaning The System
Caution: Do not use any cleaning solutions containing chloride
When cleaning the T9601 system and its components (pagers, charging base), DO NOT use any cleaning
products that contain Chloride. These products will damage the material and will stain the surface.
NOTE: Be sure to unplug the T9601 system and charging base before cleaning.
To Clean:
• Using a damp cloth, wipe the exterior of the system’s components
Long Range Systems 16 T9601 User Manual