User's Manual

Saving and Loading Your System Configuration
Once all tables have been configured and saved to the ‘Table Configuration’ tab, it is recommended that you
save your system configuration to a file on your computer. This will create a backup that can be loaded at a
later date if need be. Backing up your configuration will save you from having to recreate your table list
s
hould something happen to your system.
To save your system configuration, click on the ‘Save Configuration’ button at the bottom left of the table con-
f
iguration tab. You will then be prompted to select a location to save the configuration file.
To load a previously saved configuration, click on the ‘Load Configuration’ button and select the configura-
tion file to be loaded.
Programming Pagers
The Table Genie will ONLY program LRS Alpha Pagers.
To program an Alpha Pager:
1. Go to the Program Pagers tab.
2. Type a Pager Number and All Page Number (default 911).
Optional: Select to Enable a Group, type a Group Number between 1 and 99, and type a Group Name.
Long Range Systems 9 Table Genie UHF User Manual