User Manual

Sitter II

SITTER II SPECIFICATIONS

Specification

Description: The unit is a low power transmitter that generates NBFM signals to UHF paging receivers.

Required voltage

: One 7.5-VDC battery charger for the transmitter.

Operating Frequency

: 467.750MHz.

Modulation Rate

: Maximum of 1200bps

Transmit Power

Within CFR 47 part 15 limits for an intentional radiator.

Signal Encoding

: POCSAG encoded.

Signal Definition: Upon detection of an external switch closure, the unit transmits a POCSAG signal defined by the serial

configuration interface.

Operating Range

: (unobstructed) Up to 1/4 mile

SERVICE QUESTIONS AND ANSWERS

My System is malfunctioning - What do I do?

Should your paging system ever fail to function properly, Call Posey at XXXXXXXXXX Monday through Friday 8:30 am

to 5:00 pm Eastern Time.

• After hours, please leave a message on the technical support line (x32).

• Long Range will return the call as soon as possibly

• During weekends Long Range technicians are normally paged whenever a message is left on the tech support line.

• Please keep in mind that options are limited over the weekend.

What about repairing my system after the warranty expires?

We suggest calling Posey before sending a non-warranty item in for repair.

** Out of warranty items will be repaired and sent back C.O.D.

Ordering Additional Pagers

Call Posey AT XXXXXXXXXX for an order form and ordering instructions. Fax the Order sheet back to Posey at

XXXXXXXXXX. No cover sheet needed.