Manualshelf

User Manual

ManualsBrandsLong Range Systems ManualsElectronicsWireless Low Power Medical Paging Transmitter
123456
Sitter II
2
GENERAL INFORMATION
The Sitter II is a multi-purpose on-premise paging system.
This unit plugs into an existing Posey alert system to provide secondary alert to the main hard wire system
The pass through security contact alerts a staff pager of a call to the nurse station.
A test push button is available ensures the system operation and also is used as a page acknowledged button.
Built in rechargeable batteries ensure operation in event of power outage.
The unit can be individually programmed to provide call location and time.
The pagers used with the system can vibrate, beep and display stored messages.
INSTALLATION AND SETUP
Installation Procedure
The following is the basic installation procedure. Systems are set for the most general use. If you have specific changes,
refer to the appropriate section of this manual.
1. Unwrap all Sitter II components.
2. The following items are included with this unit.
1 – Sitter II Transmitter 1 – Software CD 1 – Programming Cable
1 – 7.5 VDC Charging adapter 1 – Programming Booklet
3. Connect the 7.5 VDC adapter to the Sitter II
4. Install the Sitter II programming software on your computer.
5. Connect the programming cable from your computer to the connector on the side of the Sitter II.
6. Program the contact switch input to page the desired pager(s).
7. Mount the Sitter II into the Posey Alarm station where desired.
8. Press the test button to test the system (transmitter and pager(s).
9. The system is ready for operation.
Installation Checklist
When Installing the Sitter II:
Be sure the Sitter II is programmed the way you want it.
Mount the Sitter II where you want it and connect the battery charger.
Press the “Test” button (twice) and be sure your pager receives the message.
Test the detector and be sure the pager receives the right message.
STAFF PAGER
7.5-VDC CHARGER INPUT
SERIAL PROGRAMMING CABLE
DETECTOR ALARM INPUT
PASS THROUGH ALARM OUTPUT
PROGRAMMING PC
PROGRAMMING CONNECTOR
PATIENT
NEEDS
ASSISTANC
TEST AND PAGE
ACKNOWLEDGE BUTTON
ALARM INDICATOR