User's Manual

Installation and Setup
Transmitter Installation
CAUTION: Do not mount the T13C transmitter or R1201F receiver antennas near any large metal objects.
NOTE: The T13C transmitter should be charging whenever not in use.
1. Unwrap all T13C transmitter and R1201F receiver components.
2. The T13C transmitter is portable and battery powered. It is charged in the same power charger
used for LRS paddle and star pagers.
3. Connect the antenna (about 3” long) onto the connector on the back of the receiver. It is best to
mount the antenna pointing straight up, perpendicular to the ground.
4. Mount the receiver convenient to a 110/220V power and near the host computer.
5. Plug the power supply into standard 110V/220V outlet and the barrel connector end into the side
hole on the R1201F receiver.
6. Connect the RS-232 cable from the R1201F receiver to the host computer.
7. Upon completion, perform the initialization on the host computer system (per manufacturer’s
specifications).
!
Long Range Systems 3 T13C User Manual