User's Manual

• Press F1 for Normally Open.
8. Enter the pager number that will be pager when this event occurs (Pager Num = - - - - ) and press ENTER.
9. Enter a User Message:
• Press F2 to create a new message, use the 1-9 keys to enter the text, and then press ENTER to Save.
•
Press F1 to edit the current message.
1
0. Select paging type mode - F1 (STAFF), F4 (GUEST).
1
1. Press F4 to EXIT.
T7470 Dry Contact Specifications:
T7470 Dry Contact Cable Specifications:
Set Alarms
This function is used to set the transmitter to page an individual or all STAFF pagers at a specific time or on
a timed interval. The transmitter can send 10 different time alarms or periodic alarms. Alarms may be set to
page a specific pager (or all pagers) or cell phone at a specific time every day. To make an alarm contact the
manager’s cell phone, this function requires Network Enabled, cell phone paging ON, a manager cell phone
number mapped, and a valid account.
1. Press SETUP and enter Password.
2. Press 1 (System).
3. Press F2 (DN) until display shows 3) ALARMS.
4. Select 3 (3: ALARMS).
5. From the Alarm menu, select the number of the alarm to set (0 through 9) and press ENTER.
6. The Alarm Display screen shows the status of the selected alarm. Select Change (F1) to en-
Input Voltage
Contact Diameter
Contact Type
0-5 Volts DC
2.5 mm
Mono Plug
Contact Diameter
Contact Type
Number of Conductors
Ring Connection
Tip Connection
2.5 mm
Mono Plug
2
Positive
Ground
Long Range Systems 13 Freedom User Manual