User's Manual

Zigbee Devices
This feature will list and add any 2.4 GHz USB Module and RT1202 device currently connected to the PC and
LAN Network for RF Communication purposes.
Zigbee Configuration
Zigbee Preset
This allows for changing the channel of the USB antenna to one of four preset channels.
Note: Contact LRS before changing this setting. The channel of the antenna must match the Starter Unit.
Associating Znode Devices
This feature allows for associating a Znode.
To Associate a New Znode:
1. Press Associate on PC Program
2. Cycle Power on Znode and Press Button on Znode once
3. Znode LED should turn purple, then begin flashing. If the Znode associates, it will flash green once
every five seconds.
4. Press the OK Button to end.
Adding Devices Manually
For devices such as the RXTG, the user can dictate a device and ComPort to be added to the device list.
To Add a Device:
1. Press Add by Add Device Manually
2. Type the ComPort of the Device.
Note: Any device connected via USB can be verified from the System Manager >> Devices >> ComPorts under Control
Panel.
3. Press Enter
Long Range Systems 8 Table Tracker User Manual