User's Manual

INSTALLATION AND SETUP
Basic Installation
1. Unpackage all system components.
- All-in-one PC
- 2.4GHz USB Antenna
- Table Trackers
- Table Tracker Charger(s)
- Starter Unit(s)
- Clearing Unit(s)
2. Setup All-In-One PC Monitor in the expeditor area
3. Plug the 2.4 GHz USB Antenna into a USB Port on the All-In-One PC
4. Power on PC - using the surge protector provided
5. Plug in the Table Tracker Charger(s) (usually placed by the cash register)
6. Place Table Trackers on Charger
7. Place Starter Unit(s) by the cash register
8. Place Clearing Unit(s) by the food expedite area
Status LED
Charge Pin
Number
Heartbeat LED
Table Tracker Stacked Charging
Long Range Systems 2 Table Tracker User Manual