User's Manual

Range Test
The Range Test feature is used to broadcast a continuous signal. This will allow for testing within
your location regarding range for your pagers to receive a page from the TX-9561EZ.
To turn ON the Range Test, press PROG-9-9-2-ENTER or PGR-9-9-2-ENTER When the range
test is active, the LCD will display an 8 moving across screen. Then the red LED will transmit
once every 10 seconds. To turn OFF the Range Test, press CLEAR
Low Battery Alert
When the transmitter’s battery is low, the LCD will display “LoBat”.
Factory Reset
To reset the transmitter factory defaults, press PROG 0 0 0 Enter
Cleaning:
LRS pagers are made from industrial-strength, polycarbonate material. However, this ma-terial
is susceptible to hairline cracking if non-approved cleaners are used. When cleaning LRS pagers,
we recommend only using
ISOPROPYL ALCOHOL-BASED CLEANERS.
To clean the equipment:
1. Take a clean rag and an isopropyl-alcohol based cleaner
2. Soak the clean rag with the isopropyl alcohol cleaner
3. Wipe down the pagers or equipment
Cleaning equipment with any other non-approved cleaners can weaken plastic and cause hairline
cracks. Pagers and equipment that are cleaned with unapproved cleaners and suffer cracking will
not be covered under warranty.
Do not submerge any LRS paging equipment in any type of liquid as this will also damage the
equipment and is not covered under the standard warranty.
CLEANING & CHARGING LRS PAGING EQUIPMENT
7