Instructions / Assembly

.''$M[,U#X(<L+%(/:=(7:=(97.)@:8:

STEP 1 – Unpack and Prepare for Assembly

Remove all items from inside grill body and lay grill body on its back. For ease of assembly, com-

plete steps 1-5 below before standing grill upright.

Tip: Flatten the cardboard box out and lay everything on it. This serves as a good working area and it helps

prevent the grill from getting scratched or damaged during installation.

STEP 2 – Attach Legs

Attach legs with fixed wheels (#3) on the left side, with wheels facing outward to the front and back

of grill. Attach legs with the rotating casters (#2) on the right side of the grill

Attach all four legs using bolts (A), flat washers (B), lock washers (C) and nuts (D)

DO NOT FULLY TIGHTEN HARDWARE

All hardware is found in included Hardware Packet (#12)

STEP 3 – Attach Bottom Shelf

Align shelf (#4) between grill legs and attach using 4 bolts (A), flat washers (B), lock washers (C)

and nuts (D).

FULLY TIGHTEN HARDWARE

STEP 4 – Install Pull bar Handle

Attach the pull bar handle (#6) using the two bolts that are screwed into the handle.

The beauty ring stays attached to the pull bar handle.

STEP 5 – Bull Horn Handle Assembly

Attach bull horn handles (#5) to grill lid using the small bolts that are screwed into handle.

Proper placement will result in the handle facing inward with the tip slightly upward.

STEP 6 – Stand Grill Upright

You will need two people to do this as the grill is very heavy.

( " ( PQGRSD(/$T(7$T(1#O+'K%U$'D(;;=5

!"##$%&'()#*+)#$',##)-.$/$-&

Questions?

Call our customer service at 1-706-922-0890

10am-8pm EST. Mon-Thurs;

10am-7pm EST Fri;

9am-3pm EST Sat.

LONE STAR CHEF GRILL